Last 5 Products Reviewed
Edwards XDS100B Scroll Pump 1-ph, 100-120/200-230V Set to 230V A73201983
Edwards XDS100B Scroll Pump 1-ph, 100-120/200-230V Set to 230V A73201983
The XDS100B is a scroll booster, with a pumping mechanism design specifically for high pumping speed. Like all booster pumps, it needs to be used in conjunction with a primary pump and is ideally matched with Edwards XDS35i or XDS46i scroll pumps. The XDS100B is optimized for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar making in virtually no tip seal wear thus reducing service intervention and maximizing uptime. The inverter drive allows the pump to be connected to a single phase supply and controls the motor characteristics and ensures the pump always run at optimum speed and allows the user to control the pump remotely.
Features and Benefits
- Lubricant-free within the vacuum envelope and hermetically sealed means totally clean and dry vacuum to prevent cross contamination
- No atmosphere to vacuum shaft seals means bearings are completely isolated, this prevents process attack and means bearings run cooler and last longer
- No oil changes required eliminating costs of contaminated oil disposal
- Simple single sided scroll design means maintenance is done in minutes for low cost of ownership and maximum up-time
- Inverter drive for consistent pumping speed at 50/60Hz
Applications
- High throughput -LCMS
| Pumping speed | 50 or 60Hz 95 m3h-1 / 56 ft3min-1 |
| Ultimate vacuum (Total pressure)* | <1 x 10-2 mbar / <8 x 10-3 Torr |
| Max continuous inlet pressure | 20 mbar / 15 Torr |
| Max permitted continuous exhaust pressure | 60 mbar / 45 Torr |
| Max permitted inlet pressure for short duration | 0.5 bar gauge / 7 psig |
| Max chamber volume to pump down from Atmospheric pressure | 100 litres |
| Max chamber volume for cyclic duty -max 6 per hour | 50 litres |
| Motor power | 0.52kW |
| Power Connector | IEC EN60320 C19 |
| Nominal rotation speed | 1750 rpm |
| Weight | 48 kg / 105 lb |
| Inlet flange | NW40 |
| Exhaust flange | NW40 |
| Noise level | 52.1 dB (A) |
| Vibration | <4.5mms -1 (rms) |
| Leak tightness (static) | <1 x 10-6 mbar ls-1 |
| Operating temperature range | 10 to 40 °C / 50 to 104 °F |
* Ultimate pressure is backing pump dependant
Edwards XDS100B Scroll Pump 1-ph, 100-120/200-230V Set to 230V A73201983
The XDS100B is a scroll booster, with a pumping mechanism design specifically for high pumping speed. Like all booster pumps, it needs to be used in conjunction with a primary pump and is ideally matched with Edwards XDS35i or XDS46i scroll pumps. The XDS100B is optimized for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar making in virtually no tip seal wear thus reducing service intervention and maximizing uptime. The inverter drive allows the pump to be connected to a single phase supply and controls the motor characteristics and ensures the pump always run at optimum speed and allows the user to control the pump remotely.
Features and Benefits
- Lubricant-free within the vacuum envelope and hermetically sealed means totally clean and dry vacuum to prevent cross contamination
- No atmosphere to vacuum shaft seals means bearings are completely isolated, this prevents process attack and means bearings run cooler and last longer
- No oil changes required eliminating costs of contaminated oil disposal
- Simple single sided scroll design means maintenance is done in minutes for low cost of ownership and maximum up-time
- Inverter drive for consistent pumping speed at 50/60Hz
Applications
- High throughput -LCMS
| Pumping speed | 50 or 60Hz 95 m3h-1 / 56 ft3min-1 |
| Ultimate vacuum (Total pressure)* | <1 x 10-2 mbar / <8 x 10-3 Torr |
| Max continuous inlet pressure | 20 mbar / 15 Torr |
| Max permitted continuous exhaust pressure | 60 mbar / 45 Torr |
| Max permitted inlet pressure for short duration | 0.5 bar gauge / 7 psig |
| Max chamber volume to pump down from Atmospheric pressure | 100 litres |
| Max chamber volume for cyclic duty -max 6 per hour | 50 litres |
| Motor power | 0.52kW |
| Power Connector | IEC EN60320 C19 |
| Nominal rotation speed | 1750 rpm |
| Weight | 48 kg / 105 lb |
| Inlet flange | NW40 |
| Exhaust flange | NW40 |
| Noise level | 52.1 dB (A) |
| Vibration | <4.5mms -1 (rms) |
| Leak tightness (static) | <1 x 10-6 mbar ls-1 |
| Operating temperature range | 10 to 40 °C / 50 to 104 °F |
* Ultimate pressure is backing pump dependant