Accepted at Checkout
Last 5 Products Reviewed
IKA Overhead Stirrer EUROSTAR 60 digital -4446001
EUROSTAR 60 digital
Universally used strong laboratory stirrer for quantities up to 40 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.
- Digital speed display
- Infinitely adjustable speed
- Push-through agitator shafts
- Overload protection
- Short-term overload operation
- Slim casing
- Quiet operation
- Error code display
|
Stirring quantity max. per stirring position (H2O) |
40 l |
|
Motor rating input |
176 W |
|
Motor rating output |
126 W |
|
Motor principle |
Brushless DC |
|
Speed display |
7 segment LED |
|
Speed range |
0/30 - 2000 rpm |
|
Reversible direction of rotation |
no |
|
Intermittent operation |
no |
|
Viscosity max. |
50000 mPas |
|
Output max. at stirring shaft |
126 W |
|
Permissible ON time |
100 % |
|
Torque max. at stirring shaft |
60 Ncm |
|
Speed control |
stepless |
|
Setting accuracy speed |
1 ±rpm |
|
Deviation of speed measurement n > 300rpm |
1 ±% |
|
Deviation of speed measurement n < 300rpm |
3 ±rpm |
|
Stirring element fastening |
chuck |
|
Temperature display |
no |
|
Chuck range min. diameter |
0.5 mm |
|
Chuck range max. diameter |
10 mm |
|
Hollow shaft, inner diameter |
11 mm |
|
Hollow shaft (push-through - when stopped) |
yes |
|
Fastening on stand |
extension arm |
|
Extension arm diameter |
16 mm |
|
Extension arm length |
220 mm |
|
Torque display |
no |
|
Nominal torque |
0.6 Nm |
|
Timer |
no |
|
housing material |
alu-cast coating / thermoplastic polymer |
|
clean room qualified |
no |
|
explosion proofed |
no |
|
Dimensions (W x H x D) |
86 x 248 x 208 mm |
|
Weight |
4.4 kg |
|
Permissible ambient temperature |
5 - 40 °C |
|
Permissible relative humidity |
80 % |
|
Protection class according to DIN EN 60529 |
IP 40 |
|
RS 232 interface |
no |
|
USB interface |
no |
|
Analog output |
no |
|
Voltage |
230 / 115 / 100 V |
|
Frequency |
50/60 Hz |
|
Power input |
176 W |
EUROSTAR 60 digital
Universally used strong laboratory stirrer for quantities up to 40 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.
- Digital speed display
- Infinitely adjustable speed
- Push-through agitator shafts
- Overload protection
- Short-term overload operation
- Slim casing
- Quiet operation
- Error code display
|
Stirring quantity max. per stirring position (H2O) |
40 l |
|
Motor rating input |
176 W |
|
Motor rating output |
126 W |
|
Motor principle |
Brushless DC |
|
Speed display |
7 segment LED |
|
Speed range |
0/30 - 2000 rpm |
|
Reversible direction of rotation |
no |
|
Intermittent operation |
no |
|
Viscosity max. |
50000 mPas |
|
Output max. at stirring shaft |
126 W |
|
Permissible ON time |
100 % |
|
Torque max. at stirring shaft |
60 Ncm |
|
Speed control |
stepless |
|
Setting accuracy speed |
1 ±rpm |
|
Deviation of speed measurement n > 300rpm |
1 ±% |
|
Deviation of speed measurement n < 300rpm |
3 ±rpm |
|
Stirring element fastening |
chuck |
|
Temperature display |
no |
|
Chuck range min. diameter |
0.5 mm |
|
Chuck range max. diameter |
10 mm |
|
Hollow shaft, inner diameter |
11 mm |
|
Hollow shaft (push-through - when stopped) |
yes |
|
Fastening on stand |
extension arm |
|
Extension arm diameter |
16 mm |
|
Extension arm length |
220 mm |
|
Torque display |
no |
|
Nominal torque |
0.6 Nm |
|
Timer |
no |
|
housing material |
alu-cast coating / thermoplastic polymer |
|
clean room qualified |
no |
|
explosion proofed |
no |
|
Dimensions (W x H x D) |
86 x 248 x 208 mm |
|
Weight |
4.4 kg |
|
Permissible ambient temperature |
5 - 40 °C |
|
Permissible relative humidity |
80 % |
|
Protection class according to DIN EN 60529 |
IP 40 |
|
RS 232 interface |
no |
|
USB interface |
no |
|
Analog output |
no |
|
Voltage |
230 / 115 / 100 V |
|
Frequency |
50/60 Hz |
|
Power input |
176 W |